This wireless presentation TimeKeeper system includes a TMR216B_RF2 Count Up/Down Timer with multiple programmable presets, and a DSP504B Large Four-digit LED wall Display visible (up to 100ft) to the speaker and the audience.
Features
- Keypad has 18 buttons and a knob.
- Programmable buttons to perform a variety of functions.
- Factory programmed to fit your application.
- Serial data output to send commands to a remote Display, Timer or other device.
- Serial data input to permit daisy chaining multiple keypads/controllers.
- Battery operation or AC power.
- Count up elapsed timer settable to Hour:Min or Min:Sec.
- Count down time remaining timer settable to Hour:Min or Min:Sec.
- Easy to use. Press Reset. Turn knob to set the desired time. Press Start.
- Subsequent timing cycles. Press Reset. The time previously used will be loaded. Press Start.
- Green, Yellow and Red warning indicators have preprogrammed settings to match Toastmasters requirements, or may be programmed by user.
- Six-digit LED fourteen-segment alphanumeric Display with 0.54 inch high digits
- Beeper provides audible sound when timer reaches zero.
- Button to turn beeper on/off.
- Connect two or more TimeKeepers together. One becomes the Timer, and the others become remote Displays.
- Made of ruggedized aluminum construction.
Specifications
- Two Serial data RJ45 connectors for accessories.
- One RS422 output with RJ45 connector for accessories.
- Ground closure 600mA output for optional beeper. (not included).
- Timer Construction: Metal enclosure, black powder coated finish.
- Display Construction: Metal enclosure, black powder coated finish.
- Power requirements: 10-18 VAC or 12-24 VDC power.
- Current consumption: 500ma.
- TMR216B_RF2 Dimensions: 9.5" x 4.625" x 2.5".
- DSP504B Dimensions: 21.5" x 8" x 2.5".
- Standard mounting is 2 key hole slots spaced 16 inches apart for wall mounting.
- There are screws at either end of the displays where D-Rings can be added. D-Rings are NOT included and may be ordered separately.
- 1/4-20 nuts on the bottom of the unit for attaching a tripod adapter or feet. The feet and tripod adapter is NOT included and may be ordered separately.
- The display has holes in the top for adding a handle. The handle is NOT included and may be ordered separately.
Cutsheet