Surface-mount and flush-mount Timers and Controllers with Accessory connectors

The TimeKeeper™ FM is designed to be flush-mounted into a lectern, podium or counter top. The Timekeeper™ SM surface-mount unit may be mounted on a wall, lectern, podium or counter top. This electronic digital timer is available as a Count Up/Down Timer as well as a Count Down-only Timer. It includes red, yellow, and green LEDs to inform you that "the timer is running" (green LED), you need to "wrap it up" (yellow LED), or "time is up" (red LED). This unit may be connected to a remote Red-Yellow-Green Indicator Lamp Unit or Large Display or to another Timer. This unit is available with an optional Time-of-Day Clock in selectable 12 hour or 24 hour mode. It can also be operated with 3 AA batteries or from AC power.

TimeKeeper™ Count Up/Down Timer with Clock

  • Count Up Timer.
  • Count Down Timer. (0 to 99.59 MM:SS or 0 to 99:59:59 HH:MM:SS)
  • User-programmable Green, Yellow and Red warning Indicators.
  • Internal beeper provides audible sound when the Timer reaches zero.
  • Button to turn beeper on/off.
  • Up to 3 user-programmable stored settings.
  • Built-in time-of-day clock displays hours/minutes in 12/24 hour time or minutes/seconds.

Applications

  • City Council, Courts and other public meetings.
  • School Board or Corporate Meetings.
  • Speech and Debate Classes, Mock Trials.
  • Test timing in classrooms.
  • Manufacturing and Production Timing and/or Counting.
  • Hospital Emergency Rooms, ICU and patient care compliance.
  • Anywhere Accurate Timing of Events is Needed.

Benefits

  • Anywhere convenience and ease of use is of the utmost importance.
  • Equal Time for each Speaker/Participant
  • Assists chairperson in conducting an efficient and smooth running meeting.
  • Improved Manufacturing Productivity and Improved work flow.
  • Light Indicator shows Green for "go" Yellow for "wrap it up" Red for "you’re done".
  • Easy to use. Just turn the knob to set the time, and press Start.
  • Display the time of the day with a single press of a button.

Features

  • Four-digit LED seven-segment Display with 0.56" high digits.
  • Connect two or more TimeKeepers™ together. One becomes the Timer, and the others become remote Displays.
  • Two RJ-11 modular connectors for accessories.
  • One RJ-11 modular connector for remote Start, Stop and Reset inputs.
  • May be powered using 3-AA batteries or AC power.
  • Construction: Metal enclosure, black powder coated finish.
  • Made of ruggedized aluminum construction.
  • Dimensions: 5-1/8" x 5-1/8" x 1-1/4"
  • Dimensions: 4-1/2" x 4-1/2" x 1-1/2"

Timer Variations

  • Flush-mount Count Up/Down Timer for use in lecterns and podiums.
  • Surface or wall-mount Timers.
  • Table Top Timers.
  • Handheld Timers.

Options

  • Optional Remote control Buttons for operating the Timer/Counter remotely.
  • Optional optically-coupled inputs for connecting to a machine or PLC.
  • Optional Beep Relay output.
  • Optional Run Relay output.

Timer Mode

  1. Press Reset to select timer mode.
  2. Turn knob to set desired time
  3. Press the Start/Stop button to start the Timer.
  • The Select button selects between setting hours, minutes and seconds.
  • The Mode button selects between Count Up and Count Down modes. You may change between Count Up and Count Down modes while the Timer is running. In Count Down mode, the Timer stops when it reaches zero. In Count Up mode, the Timer keeps running when the preset time is reached.
  • Press and hold the Mode button to turn the beep on or off.
  • Press and hold the Select button to set the Wrap-It-Up time.
  • Press the Select button again to set the Green warning time.

Clock Mode

  1. Press Clock button to select Clock mode.
  2. The Select button selects displaying 12 hour time, military time or seconds. In 12 hour mode, the PM LED will be on for PM and off for AM.

Press and hold the Clock button to enter set time mode.

  1. Turn the Knob to set the hours.
  2. Press the Clock button again.
  3. Turn the Knob to set the minutes.
  4. Press the Clock button again.
  5. Turn the Knob to set the seconds.
  6. Press the Clock button again to return to normal display.