TimeKeeper™ Count Up/Down Timer with Clock

• Count Down Timer. (0 to 99.59 MM:SS)
• Count Up Timer.
• Built-in time-of-day Clock displays hours/minutes in 12/24 hour time or minutes/seconds.

Applications

• Process control for triggering events at specified times.
• Count down to the start of specific events.
• Remote control operation of timed events.
• Test timing in classrooms.
• Manufacturing and Production Timing and/or Counting.
• Hospital Emergency Rooms, ICU and patient care compliance.
• Anywhere Accurate Timing of Events is Needed.

Benefits

• Anywhere convenience and ease of use is of the utmost importance.
• Improved Manufacturing Productivity and Improved work flow.
• Easy to use. Just select the desired time, and press Start.
• Display the time of the day with a single press of a button.

TMR014B5FMOC Features

• Optically isolated inputs for Start, Stop and Reset.
• Remote inputs operate on a 6 to 24VDC signal.
• Ground closure output for timer running status.
• Ground closure output for beep when the timer reaches zero.
• Ground closure outputs can drive up to 1/2 amp resistive or inductive loads.
• Power input 6VAC or 18VAC.
• Four-digit LED seven-segment Display with 0.56" high digits.
• Construction: Metal enclosure, black powder coated finish.
• Made of ruggedized aluminum construction.
• Dimensions: 4.6" x 3-1/4" x 1-1/2"

TMR014B5FMOCA Features

• Optically isolated inputs for Start, Stop and Reset.
• Status LED indicators to indicate the state of the ground closure inputs.
• Reverse polarity indicators for the ground closure inputs.
• Remote inputs operate on a 6 to 24VDC signal.
• Ground closure output for timer running status.
• Ground closure output for beep when the timer reaches zero.
• Ground closure outputs can drive up to 1/2 amp resistive or inductive loads.
• Relay output that may be assigned to either the beep output or the run output.
• Relay output has both normally open and normally closed contacts.
• The SPDT relay output is rated for 5 amps.
• Aux 12VDC power output provides 250mA auxillary power for sensors and/or beepers.
• Power input 115VAC or 230VAC.
• Four-digit LED seven-segment Display with 0.56" high digits.
• Construction: Metal enclosure, black powder coated finish.
• Made of ruggedized aluminum construction.
• Dimensions: 4.6" x 3-1/4" x 1-1/2"

Timer Variations

• Flush-mount Count Up/Down Timer for installation in your enclosure.

Timer Mode

1. Press Reset to select timer mode.
2. Press the up/down buttons set desired time
3. Press the Start/Stop button to start the Timer.

• The Start button selects between Count Up and Count Down modes. You may change between Count Up and Count Down modes while the Timer is running. In Count Down mode, the Timer stops when it reaches zero. In Count Up mode, the Timer keeps running when the preset time is reached.

Clock Mode

1. Press Clock button to select Clock mode.
2. The Clock button selects displaying 12 hour time, military time or seconds. In 12 hour mode, the PM LED will be on for PM and off for AM.

Press and hold the Clock button to enter set time mode.

1. Press the up/down buttons to set the hours.
2. Press the Clock button again.
3. Press the up/down buttons to set the minutes.
4. Press the Clock button again.
5. Press the up/down buttons to set the seconds.
6. Press the Clock button again to return to normal display.