Timers

Varieties (in many cases, the Varieties of Timers are available as Modes in the same Timer product)
• Count Down Timer - Time Remaining.
• Count Up Timer - Time Elapsed.
• Time of Day Clock (also available as an optional mode for Count Up or Count Down Timers).
Options
• Beeper Options
• No Beep.
• Beep at time zero. This is the default.
• Beep at warning times.
• Beep at time zero until the Reset button is pressed.
• Timer Options
• Change to Count Up Mode after counting down to time zero.
• Stop at time zero. This is the default.
• Restart at a Preset time after counting down to time zero.
• One-Button Timer Operation
• Press the button to Reset and Start the Timer.
• Press the button again to Stop the Timer.
• Two-Button Timer Operation
• Press the first button to Start or Pause the Timer.
• Press the second button to Reset the Timer.
• Three-Button Timer Operation
• Press the first button to Start the Timer.
• Press the second button to Stop the Timer.
• Press the third button to Reset the Timer.
  NOTE: Pressing the Start button while the Timer is running freezes the display for a few seconds to display lap/split time.
• Display Options.
• Displays for timers are available with various numbers of displayed digits and with options for which units are displayed:

2 Digits	4 Digits	6 Digits
DD (days)	DDDD (days)	DDD:HH (days,hours)
HH (hours)	HHHH (hours)
	HH:MM (hours,minutes)	DD:HH:MM (days,hours,minutes)
MM (minutes)	MMMM (minutes)
	MM:SS (minutes,seconds)	HH:MM:SS (hours,minutes,seconds)
SS (seconds)	SSSS (seconds)	SSSSSS (seconds)
	SSS.t (seconds,tenths)	SSSSS.t (seconds,tenths)
hh (hundredths)	SS:hh (seconds,hundreths)	MM:SS:hh (minutes,seconds,hundreths)
	S.TTT (seconds,thousandths)

• Displays that are two digits wide and 7 inches high or higher provide a leading "1" digit.
• Other custom numbers of digits may be available, such as 3 or 5.
• Various Triggering Devices.
• Combined to work with Counters.